MIRO-B Software
Software update procedure
To install the MDK on your workstation, follow the instructions on the Maintenance page of the documentation. You can then use the simulator right away (provided you have installed the pre-requisites - see Prepare workstation if you haven't done this before).
To update the software on your robot, you should continue on the Maintenance page to follow the instructions first to Reprogram P3, then to Reprogram P2, to completely update your robot's software.
Current Release (200107)
MIRO Developer Kit is the suite of software including everything required for working with a MIRO robot, either simulated or physical. It comes with support for updating the software on a physical robot; this is the only item not included in the Lite Edition.
MDK Lite is like the complete MIRO Developer Kit, but "lite"-er. It comes without support for updating the software on a physical robot, making for a much smaller download, but provides complete support for developing with a physical robot or for running the simulator.
NB: If you are only installing MIROapp, the version must match that of your robot. Robots shipped before November 2018 are pre-loaded with 171012 - if you have not updated your robot's software, please try that version first.
The MIROapp, the Android application for interfacing with your MIRO over Bluetooth, is included with all MDK editions, but it is included here as a direct download for convenient installation on your Android device. Follow this link on your device to install the app directly.